Stanrose Envirotech India Private Limited

BenefitsHygienic - It provides a jointless epoxy flooring making it dust free & easy to cleanChemical resistance - It has excellent chemical resistance to most chemicalsWear resistance - It provides a tough floor topping to withstand foot & light vehicular trafficGood abrasion resistance & good UV stability
Where it is used?Staroxy (Epoxy) HG is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for flooring in following industries.Pharmaceutical IndustriesElectronic Assembly AreasClean RoomsFood Processing Industries

Scope Of WorkSurface preparing by removing of dust, oil, grease, unwanted cements etc. through heavy duty grinding machine for exposing the micro pores on concrete.Filling of control joints, holes and uneven surface through epoxy mortarApplying of Staroxy Primer let it cure for 8 hrs.Application of Staroxy UL (Self Levelling Screed).Applying of Staroxy SL as per recommended thickness and let it cure for 36 hrs. (for optimum result)

Surface PreparationSuitable methods are sanding or grinding. Any surfaces that have been contaminated with oils may also require chemical cleaning.Use an industrial vacuum that picks up even small dust particles. The floor must be cleaned of all dusts and residues before starting to prime. Otherwise you will have various particles trapped within the coat and adhesion will be significantly weakened. The less micro-dust on the surface the less primer you will need.For thin cracks it may be necessary to slice them with a cutter before filling in order to improve the anchoring of the grout.

Primer - Staroxy 103 MOTMix Part A and Part B of Staroxy 103 MOT with Electric Stirrer. Once parts A & B have been thoroughly mixed, the product may be thinned to aid application.Apply the primer coat by brush and then roll the centre with a short nap roller.Allow a drying time of at least 4 hours before applying basecoat. If you intend to install epoxy corner coving, this should be done before commencing the next step.

Basecoat - Staroxy UL 1000The base coat used is usually Staroxy UL. Mix Part A and Part B of the Staroxy UL in a clean bucket with Electric Stirrer according to the instructions on the technical data sheet.Starting at the far corner, apply the basecoat by trowel and roller and evenly broadcast the Sand if necessary, into the wet product until all the basecoat is covered, except at the leading edge.
Topcoat - Staroxy SL 1000It is important to select a suitable topcoat which will meet all the visual and wearing requirements.Mix the topcoat usually Staroxy SL 1000 as per the instruction letter.Remove the perimeter tape and protect the floor from full traffic for 7 days.

Staroxy SL 2000 is a high-quality, solvent-free, self-leveling epoxy topcoat designed for flooring systems with a thickness of 2-4 mm. It provides a smooth, durable, and high-gloss finish, enhancing both the aesthetics and performance of the flooring. This topcoat delivers excellent resistance to wear, chemicals, and mechanical stresses, making it suitable for demanding industrial, commercial, and hygienic environments.     High Gloss Finish:  Creates a reflective, polished surface that enhances the visual appeal of floors in a wide range of settings.   Exceptional Durability:  Withstands heavy traffic, abrasion, and impact, ensuring long-lasting performance.   Chemical Resistance:  Protects against exposure to oils, solvents, cleaning agents, and mild chemicals, making it ideal for industrial applications.   Seamless and Non-Porous:  Provides a joint-free surface that is easy to clean and resistant to microbial growth, ensuring hygienic conditions.   Abrasion Resistance:  Suitable for high-traffic areas where wear and tear are common.   UV Stability:  Maintains its gloss and appearance over time, even in controlled UV-exposed environments.   Self-Leveling Properties:  Ensures uniform application and thickness, reducing installation time and effort.   Environmentally Friendly:  Solvent-free formulation minimizes VOC emissions, ensuring safe application and reduced environmental impact.     Industrial Flooring:  Ideal for manufacturing plants, warehouses, and assembly lines requiring a robust and visually appealing surface.   Hygienic Environments:  Perfect for cleanrooms, pharmaceutical facilities, laboratories, and food processing plants where hygiene and cleanliness are critical.   Commercial Spaces:  Suitable for retail stores, showrooms, and office floors that demand a polished appearance.   High Traffic Areas:  Withstands the demands of heavy pedestrian and vehicular traffic in parking garages, logistics hubs, and workshops.   Wet and Moisture-Prone Areas:  Provides a water-resistant, easy-to-maintain finish for kitchens, basements, and wet processing zones.   Protective Topcoat:  Acts as an aesthetic and functional finishing layer over epoxy or polyurethane underlays.  Application Areas Manufacturing units and industrial warehouses Retail outlets, showrooms, and exhibition spaces Food and beverage processing facilities Pharmaceutical plants and laboratories Parking garages and basements Cleanrooms and hygienic workspaces