Stanrose Envirotech India Private Limited

Staroxy 22 is a two-component amine cured solvent free epoxy coating. It is a self-smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion, corrosion and impact resistance. If enhanced slip resistance is required Stanrose Antiskid can be used in the system. Can be applied directly in two coats or on approved primers depending on the conditions of the concrete substrate. 

Uses

• Designed for a wide range of surfaces with various levels of mechanical and chemical exposure. Recommended for warehouses structures, garages, dairies, factories, laboratories, aircraft hangars, food, beverage and plant rooms. 

Advantages:

• Staroxy 22 coatings provide optimum protection against abrasion, turbulence, corrosive fluids and extreme temperatures. Epoxy coating is not only durable, but also resistant to many corrosive substances. Epoxies are a top choice for many industrial coating applications, including steel, metal, concrete, and more. 

Some of the many benefits of epoxy coating include: 

• Durability
• Non-Toxic
• Clean & Easy to maintain
• Weather Resistant
• Impact Resistant
• Chemical Resistant

Direction For UseSubstrate Requirements

• To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Substrates Temperatures must be a minimum of 55-60°F. and a maximum of 85°F. 
• Laitance deposits are best removed by Planetary diamond disc grinder or by captive blasting followed by vacuum cleaning to remove dust debris. 
• Substrate must be clean and free of Dirt, waxes, curing agents and any other foreign material that will interfere with bonding. 

Surface Preparation

• Remove oil, grease and any other contaminants using thinner. Blast clean to minimum Sa 2% (Swedish standard SIS 05 5900). If blasting is not practically possible, make full use of mechanical tools to remove loose rust and scale to St.2 Swedish standard. Surface should be clean and dry before application of Staroxy 22. New concrete or cementitious substrates should have been placed at least 28 days and have a moisture content of less than 5% before topping with Staroxy 22. 
• After surface is dry, all repair work like sealing of joints, crack filling of cavities and crevices should be carried out. 
• If the surface is Tremix or smooth surface then Shot Blasting is carried out to make the surface rough in order to enhance the bonding of the primer. 
• Concrete defects such as voids, bug holes, excess porosity, and physical and chemical damage are usually filled or repaired prior to the installation of the F/C system. (Materials such as slurries, mortars, and polymer concrete are used to level, smooth and patch concrete surfaces. 
• The laitance (A thin, weak, brittle layer of cement and aggregate on concrete surface) on in-situ bases and any surface sealer or curing membrane should be entirely removed by suitable mechanized equipment, e.g. shot- blasting, panning or grinding, to expose cleanly the coarse aggregate 

Mixing And Application

• Pack components are pre-weighed for optimum performance. Never split packs. 
• Stir resin thoroughly and then mix two parts of resin with one part of hardener by volume. Empty contents of Resin into a mixing container and pre-mix to assure the suspension of solids. Stir resin thoroughly and then mix two parts of resin with one part of hardener by volume. 
• Add Hardner and continue to mix to a uniform consistency for 1-2 minutes. 

Staroxy Coaltar is a two-component, solvent-based epoxy coaltar paint specially formulated for superior corrosion resistance and waterproofing. Combining the robust properties of epoxy resin with the water-resistant nature of coaltar, this coating provides exceptional protection for structures exposed to harsh environments, including underground, underwater, and industrial applications. It offers excellent adhesion, chemical resistance, and durability, making it ideal for long-term performance in demanding conditions.     Exceptional Corrosion Resistance:  Protects metal and concrete surfaces from rust and degradation in aggressive environments.   Superior Waterproofing:  Provides a highly impermeable barrier, making it suitable for wet and submerged surfaces.   Durable Performance:  Resists abrasion, chemicals, and weathering for extended service life.   Thermal Resistance:  Performs effectively in a range of temperatures, including high-temperature conditions.   Versatile Application:  Compatible with a variety of substrates, including steel, concrete, and masonry.   Low Maintenance:  Reduces the frequency of repairs and recoating, offering cost-effectiveness over time.   Easy Application:  Can be applied by brush, roller, or spray for efficient and uniform coverage.     Structure Coating:  Protects bridges, tanks, pipelines, and other infrastructure from corrosion and water damage.   Underground Applications:  Ideal for coating underground pipelines, foundations, and storage tanks to prevent moisture intrusion.   Marine Applications:  Provides long-lasting protection for ships, offshore platforms, and other marine structures.   Chemical Plants:  Coats equipment and surfaces exposed to aggressive chemicals and moisture.   Waterproofing:  Used in sewage treatment plants, basements, and water reservoirs to create a watertight seal.  Application Areas:   Industrial:  Coating for steel and concrete structures in chemical processing plants and refineries.   Marine & Offshore:  Protects submerged and splash zone areas on ships, docks, and underwater pipelines.   Infrastructure:  Bridges, tunnels, dams, and other public works exposed to harsh conditions.   Water & Sewage Systems:  Interior and exterior surfaces of tanks, pipelines, and manholes.

Staroxy 110 MOT UL is a heavy-duty, solvent-free epoxy underlay designed for flooring applications requiring a thickness of 3-5 mm. It offers exceptional strength, durability, and performance in demanding environments. This moisture and oil-tolerant underlay is specifically formulated to level and reinforce substrates, creating a smooth, robust base for epoxy or polyurethane topcoats. Ideal for industrial and high-traffic areas, Staroxy 110 MOT UL ensures superior longevity and resistance to mechanical and chemical stress.     Moisture and Oil Tolerance:  Performs reliably on damp or oil-contaminated substrates, minimizing the need for extensive cleaning.   High Load-Bearing Capacity:  Designed to withstand heavy mechanical loads, making it ideal for industrial environments.   Seamless Finish:  Provides a smooth and level surface for topcoat application, enhancing aesthetics and functionality.   Chemical Resistance:  Protects against oils, chemicals, and mild corrosive agents.   Environmentally Safe:  Solvent-free formulation ensures low VOC emissions and safety for applicators and the environment.   Durable and Long-Lasting:  Resistant to abrasion, impacts, and wear, ensuring extended service life.   Versatile Application:  Can be applied using a trowel or screed for efficient and user-friendly installation.     Industrial Flooring Systems:  Acts as a durable underlay for epoxy and polyurethane flooring systems in factories, warehouses, and production areas.   Leveling and Repair:  Ideal for leveling uneven or damaged concrete substrates before applying topcoats.   Heavy-Traffic Zones:  Suitable for high-traffic areas like logistics hubs, loading docks, and manufacturing floors.   Oil-Contaminated Environments:  Designed for use in garages, service stations, and workshops where oil spills are common.   Moisture-Prone Settings:  Works effectively in slightly damp conditions, including basements and water treatment facilities.   Chemical Processing Areas:  Provides a strong base in environments exposed to chemicals or cleaning agents.  Application Areas Factories and heavy manufacturing units Warehouses and distribution centers Automotive workshops and service stations Food processing and pharmaceutical plants Parking garages and basements Water treatment and wastewater facilities

Other Details:

• With an eager to serve the best, we are engrossed in manufacturing, exporting and supplying the finest quality Epoxy Filler.
  
•  This resin is finely processed at our well-developed production unit using superlative quality chemical compounds and modern processing techniques in sync with set market quality standards.
• The offered resin is extensively used in chemical and civil engineering applications.